Presonus

Studio 192 Mobile

  • Sale
  • Regular price $599.95


Built to create in the studio or on the go.

The PreSonus® Studio 192 Mobile USB 3.0 audio interface delivers exceptional sonic fidelity, flexible connectivity, and professional monitoring and mixing controls in a compact desktop design. Whether you’re a producer, an audio engineer, an independent band, a sound designer, or all of the above, your Studio 192 Mobile was built for you to create.

Features

General Features

  • 22x26, 24-bit, 192 kHz audio interface and studio command center
  • Input monitoring with StudioLive® Fat Channel DSP processing on every analog input and the first ADAT inputs
  • Integrated zero-latency monitoring
  • Speaker switching and talkback

Integrated Software

  • Total integration with included Studio One® Artist DAW software (Mac/Windows) for multitrack music production, monitor mixing with effects, and studio command features
  • Wireless control over preamp levels, monitor mixing, and speaker switching from included UC Surface touch-control software (Mac®/Windows®/iPad®) and from free Studio One Remote for iPad
  • Compatible with most recording software for Mac and Windows

Flexible Connectivity

  • Simultaneous I/O up to 22 inputs/26 outputs (8x14 at 192 kHz)
  • Individual stereo main balanced outputs with mono, dim, mute, output metering and level control accessible from front-panel and UC Surface
  • 2 front-panel combo microphone/instrument inputs
  • 2 XMAX remote-controllable mic preamps with individually switched 48V phantom power
  • 2 balanced, line level, direct-to-ADC inputs, available via dual-purpose rear-panel combo jacks
  • 4 balanced ¼” TRS outputs for monitor mixing and speaker switching
  • ADAT Optical/Dual SMUX inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channels at 88.2 or 96 kHz
  • Stereo S/PDIF coaxial input and output
  • 1 high-volume headphone output with dedicated DAC
  • BNC word clock input and output with low-jitter clocking

Digitalia

  • USB 3.0 audio interface
  • USB 2.0 compatible
  • 24-bit resolution and up to 192 kHz sampling rate
  • Top-quality 118 dB A/D/A converters

Physical

  • Road-rugged construction with all-metal chassis and metal knobs
  • 1U rack-mountable
  • 18 VDC external power supply (included)

    Computer system requirements:

    Below are the minimum computer-system requirements for UC Surface, QMix®-UC, and Studio One®.

    Mac

    • Mac® OS X 10.8.5 64-bit or later
    • Intel® Core™ 2 Duo processor (Intel Core i3 or faster recommended)
    • 4 GB RAM (8 GB or more recommended)

    Windows

    • Windows® 7 x64/x86 SP1 + platform update, Windows 8.1 x64/x86, Windows 10 x64/x86
    • Intel Core 2 Duo or AMD Athlon™ X2 processor (Intel Core i3 or Athlon X4 or faster recommended)
    • 4 GB RAM (8 GB or more recommended)

    Mac and Windows Systems

    • USB 2.0 port
    • Internet connection
    • Internal or external 7200 RPM storage drive highly recommended
    • 30 GB hard disk space
    • Monitor with 1366x768 resolution

    iOS

    • iOS 9.3 or later
    • iPad Pro, iPad Air 2, iPad Air, iPad mini 4, iPad mini with Retina display, iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2


    Android (QMix-UC)

    • Android™ 5.0 (Lollipop) or later
    • Android smartphone or tablet
    Note: The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
    Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio signals.

    Technical Specifications

    Mi​crophone Preamp

    Type XLR Female (via Combo), Balanced Remote
    Maximum Input level (min. gain, 1 kHz@0.5% THD+N) +12 dBu, ±0.5 dB
    Gain Control Range 60 dB, ±1 dB
    Frequency Response (A-D) 10 Hz to 40 kHz, ±0.2 dB
    Dynamic Range (min. gain, a-wtd) > 110 dB
    Dynamic Range (mid. Gain, unwtd) > 105 dB
    THD+N (min. gain, a-wtd) < 0.005%
    Input Impedance 1.6 kΩ
    EIN (+55 dB gain, 150Ω input, 20 Hz-22 kHz, a-wtd) < 128 dBu
    Common Mode Rejection Ratio (1 kHz, +55dB gain) > 55 dB
    Phantom Power +48V, ±3V, > 8mA per channel

    Instrument Inputs

    Type ¼” TS Female (via Combo), Unbalanced
    Maximum Input Level (min. gain, 1 kHz@0.5% THD+N) +16 dBu ±0.5 dB
    Gain Control Range 60 dB, ±1 dB
    Frequency Response (A-D) 20 Hz to 20 kHz, ±0.2 dB
    Dynamic Range (min. gain, a-wtd) > 110 dB dB
    Dynamic Range (mid. Gain, unwtd) > 105 dB
    THD+N (1 kHz, -1 dBFS, a-wtd) < 0.005%
    THD+N (1 kHz, -1 dBFS, un-wtd) < 0.005%
    Input Impedance > 1 MΩ
    Crosstalk (1 kHz, channel-to-channel) < -80 dB

    Line Inputs

    Type ¼” TRS Female (via Combo), Balanced
    Maximum Input Level (min. gain, 1 kHz@0.5% THD+N) + 18 dBu, ±0.5 dB
    Frequency Response (A-D) 20 Hz to 20 kHz, ±0.2 dB
    Dynamic Range (min. gain, a-wtd) > 114 dB
    Dynamic Range (mid. gain, unwtd) > 105 dB
    THD+N (1 kHz, -1 dBFS, a-wtd) < 0.005%
    Input Impedance 10 kΩ
    Crosstalk (1 kHz, channel-to-channel) < -80 dB

    Main and Line Outputs

    Type (Line Outputs) ¼” TRS Female, Impedance Balanced
    Type (Main Outputs) ¼” TRS Female, Impedance Balanced
    Maximum Output Level +18 dBu, ±0.5 dB
    Frequency Response 20 Hz to 20 kHz, ±0.2 dB
    Dynamic Range (a-wtd) > 112 dB
    THD+N (1 kHz, -1 dBFS, un-wtd) < 0.005%
    Output Impedance 51Ω
    Crosstalk (1 kHz, channel-to-channel) < -80 dB

    Headphone Outputs

    Type ¼” TRS Female, Stereo, Unbalanced
    Maximum Output Level 150 mW/channel @ 60Ω
    Frequency Response 20 Hz to 20 kHz, ±0.3 dB
    Dynamic Range (a-wtd) > 103 dB
    THD+N (1 kHz, -1 dBFS, un-wtd) < 0.005%
    Crosstalk (1 kHz, channel-to-channel) < -80 dB

    Signal Level LEDs

    Signal 1 -50 dBFS
    Signal 2 -30 dBFS
    Signal 3 -20 dBFS
    Signal 4 -10 dBFS
    Signal 5 -6 dBFS
    Signal 6 -4 dBFS
    Signal 7 -2 dBFS
    Clip -0.5 dBFS

    Digital Audio

    Host Interface USB 3.0 (backwards compatible to USB 2.0)
    ADC Dynamic Range (A-wtd, 48 kHz) 118 dB
    DAC Dynamic Range (A-wtd, 48 kHz) 118 dB
    Bit Depth 24 bits
    Internally Supported Sample Rates 44.1, 48, 88.2, 96, 176.4, 192 kHz
    ADAT Optical I/O ADAT/SMUX II formats supported [16x16 (44.1/48 kHz), 8x8 (88.2/96 kHz)]
    S/PDIF I/O RCA female connections, supported up to 96 kHz
    Word Clock I/O BNC connector, 4.5 Vpp @75Ω load

    Clock

    Jitter <50 ps RMS (20 Hz – 20 kHz)
    Jitter Attenuation >60 dB (1 ns in => 1 ps out)

    Power

    External Power Adapter +12 VDC, 3.0A, center positive
    Connector Type Barrel: 5.5 mm OD, 2.1 mm ID, 9.5 mm length